Removes iron stain quickly and completely.
Leaves surfaces clean, and streak free.
ERW-XL will remove even thick old layers of iron stain from nooks and crannies.
To use simply spray OR brush on, agitate, leave a short while and brush rinse off.
Benefits of using ERW-XL
• Free of oxalic acid - uses new technology
• Very quick and effective
• Thick and foams so it clings - easy to use.
• Stays wet for a long time
• Leaves surfaces clean, streak-free and shiny
• Effective in hard or soft water
• Does not form white deposit with hard water
• Easily applied by brush or spray
• Removes old thick build up of iron dust
• Lifts off ordinary soil and grime
• Removes oil and grease
ERW-XL
Removes Rust Staining Browning
from Stainless steel, Painted and Hard surfaces
A revolutionary deep cleaner for stainless steel using NEW Technology
ERW-XL is a concentrated deep cleaner for stainless steel and iron stain removal from most hard surfaces.
We have developed a safe non hazardous formula that gently removes browning and rust staining from stainless steel without damaging the surface or enviroment.
Based on a mineral salt the ERW-XL formula gently pulls out the staining from all crevices and is especially effective on brushed and textured finishes as it remove all contaminants from within the grain preventing re-contamination.
Unlike harsh acid cleaners such as oloxic acid ERW-XL will not dull and damage the surface finish.
Acid cleaners burn the top layers of the surface resulting in a dull finish.
ERW-XL is also a non-abrasive cleaner that will not blurr the surface nor damage the peaks of brushed finishes.
The use of harsh acids or abrasive cleaners will damage the surface and as a result re-contamination will occur much sooner.
As the diagram below shows
This product page has now been upgraded, for a more visual display of the products please click on the button to view.
+
+
Recommended
We recommend that once the cleaning process has been completed to a satisfactory level the surface should be rinsed thoroughly with fresh water and then neutralised with either ERW-BD or ERW-ph to ensure any acid deposits that caused the original contamination are neutralised.
